Custom Parts, On Demand

Q235 (sheet metal fabrication)

Q235 is a weldable, formable low-carbon structural steel for cut, bent, stamped, and welded sheet metal parts.

Best for: industrial racks, brackets, chassis frames, equipment bases, boxes, and shields with general structural requirements.

Cold rolled electroplated plate_SECC

SECC is electro-galvanized cold-rolled steel that combines good formability and dimensional consistency with basic corrosion protection.

Best for: internal chassis parts, power-supply housings, electronics brackets, and indoor components that need a clean, corrosion-resistant finish.

Cold rolled plate_SPCC (sheet metal fabrication)

SPCC is a cold-rolled low-carbon steel with a smooth surface, consistent thickness, and good formability.

Best for: electronics housings, instrument panels, chassis covers, control boxes, appliance components, and indoor cabinets.

Hot-dip galvanized steel plate_SGCC (sheet metal fabrication)

SGCC is hot-dip galvanized steel with a durable zinc coating for improved corrosion resistance in outdoor and humid environments.

Best for: outdoor cabinets, control boxes, HVAC housings, brackets, and sheet metal assemblies used in humid environments.

Hot rolled plate_SPHC

SPHC is a cost-effective hot-rolled low-carbon steel commonly supplied in heavier gauges for structural sheet metal parts.

Best for: equipment bases, heavy brackets, reinforcing ribs, frames, and load-bearing parts where strength and cost matter more than cosmetic finish.

Aluminum alloy_AL5052 (sheet metal fabrication)

Aluminum 5052 is a lightweight aluminum-magnesium alloy with good corrosion resistance, bending performance, and formability.

Best for: lightweight enclosures, equipment panels, robotics covers, automotive brackets, and corrosion-resistant sheet metal assemblies.

Stainless steel_SUS201 (sheet metal fabrication)

SUS201 is an austenitic stainless steel with good strength and moderate corrosion resistance at a lower material cost than SUS304.

Best for: indoor panels, appliance parts, commercial-equipment housings, and cost-sensitive stainless steel components.

Stainless steel_SUS304 (sheet metal fabrication)

SUS304 balances corrosion resistance, formability, and weldability for industrial and consumer sheet metal products.

Best for: food-processing equipment, laboratory equipment, instrument housings, clean sheet metal assemblies, and corrosion-resistant cabinets.

Stainless steel_SUS316 (sheet metal fabrication)

SUS316 is a molybdenum-bearing austenitic stainless steel with greater resistance to pitting, crevice corrosion, and chloride exposure than SUS304.

Best for: coastal equipment, chemical and pharmaceutical housings, clean equipment, and food-processing components exposed to corrosive environments.

Stainless steel_SUS430 (sheet metal fabrication)

SUS430 is a magnetic ferritic stainless steel with better corrosion resistance than carbon steel and a lower material cost than SUS304.

Best for: appliance panels, kitchen equipment, decorative trim, guards, and structural parts with moderate corrosion-resistance requirements.

Copper (sheet metal fabrication)

T2 copper provides high electrical and thermal conductivity with good ductility for stamped, bent, and formed components.

Best for: heat sinks, thermal covers, grounding contacts, shielding covers, busbars, terminals, and conductive equipment components.

Brass (sheet metal fabrication)

Brass combines formability, corrosion resistance, conductivity, and a decorative finish for stamped and bent sheet metal components.

Best for: precision connectors, terminals, decorative panels, nameplates, and compact components that require accuracy and finish quality.

ABS

ABS is a widely used molding resin with balanced mechanical properties, dimensional stability, flow, and finish quality.

Best for: electronics housings, appliance components, automotive interior parts, instrument panels, and industrial enclosures.

PA (injection molding)

Polyamide (nylon) is a strong engineering polymer with good wear resistance, low friction, and fatigue performance.

Best for: gears, bushings, pulleys, connectors, automotive under-hood components, and wear-resistant industrial parts.

PBT (injection molding)

PBT offers dimensional stability, electrical insulation, and chemical resistance for connectors, sensor housings, and automotive electronics.

Polycarbonate (PC)

Polycarbonate combines high impact strength, optical clarity, and heat resistance for protective and structural parts.

Best for: transparent housings, protective covers, light diffusers, optical components, and impact-resistant enclosures.

Polyethylene (PE)

Polyethylene offers good chemical resistance, impact resistance, and flexibility for durable molded components.

Best for: containers, pipe fittings, chemical-handling components, protective parts, and corrosion-resistant structures.

Polypropylene (PP)

Polypropylene combines low density, chemical resistance, and fatigue resistance for lightweight molded parts.

Best for: consumer-product housings, food containers, medical consumables, automotive interior parts, chemical containers, and living-hinge applications.

Polyvinyl Chloride (PVC)

PVC provides chemical resistance and inherent flame-retardant characteristics and can be formulated in rigid or flexible grades.

Best for: electrical insulation, pipe fittings, joints, industrial guards, construction components, and corrosion-resistant parts.

Acrylic (PMMA)

PMMA is a transparent engineering plastic with high light transmission and an excellent surface finish for visual and optical components.

Best for: lampshades, transparent panels, display windows, optical structural parts and products requiring high transparency and high surface quality.

Acetal (POM)

POM provides rigidity, wear resistance, and dimensional stability for gears, bearings, sliders, guides, and precision mechanisms.

Rubber-Like TPU

TPU combines rubber-like flexibility with thermoplastic processability for durable, resilient molded parts.

Best for: seals, protective electronics covers, bumpers, flexible connectors, and wear-resistant components.

Polyether Ether Ketone (PEEK)

PEEK is a high-performance engineering polymer with excellent strength, temperature capability, and chemical resistance.

Best for: aerospace components, medical-device parts, high-temperature seals, semiconductor equipment, and demanding industrial components.

Acrylic (PMMA)

PMMA-like casting resin provides high clarity and gloss for transparent visual prototypes and low-volume parts.

Best for: transparent windows, light covers, instrument panels, display models, and cosmetic prototypes that prioritize clarity and surface quality.

Polycarbonate (PC)

PC-like casting resin provides greater toughness and thermal capability for impact-resistant functional prototypes and structural parts.

Best for: impact-resistant housings, brackets, snap-fits, transparent covers, functional validation, and low-volume production.

ABS

ABS-like casting resin balances toughness, dimensional stability, and finish quality for general-purpose visual and functional parts.

Best for: housings, structural brackets, assembly validation, painted appearance models, market-testing prototypes, and low-volume production.

Nylon (PA)

Nylon-like casting resin provides toughness and impact resistance for snap-fits, assemblies, and structural validation parts.

Best for: snap-fits, housings, brackets, assembly trials, impact-resistant validation parts, and low-volume production.

Acetal (POM)

POM-like casting resin supports low-friction mechanisms and dimensionally stable functional validation parts.

Best for: functional validation of gears, sliders, guides, bushings, and snap-fit mechanisms in low-volume builds.

Polypropylene (PP)

PP-like casting resin offers low density, chemical resistance, and flexibility for containers, thin walls, and functional prototypes.

Best for: chemically resistant housings, containers, pipe fittings, structural validation parts, and low-volume assemblies.

Silicone Rubber

Cast silicone provides elasticity, weather resistance, and a soft touch for seals, buttons, cushions, and waterproof prototypes.

Best for: seals, gaskets, buttons, cushions, dust caps, soft-touch components, and waterproof assembly trials.

Soft Rubber

Flexible PU provides abrasion resistance and rebound for grips, sleeves, cushions, connectors, and flexible prototypes.